Milk White 10 Micron HDPE Perforated Film
Description:
Perforated film also called thermofusible film, burn-off film,
torchable polyethylene foil,
thermofusible HMHDPE film and torch-able film.
It is 3-layers blowing film, which made of High Density Polyethylene (HDPE).
It is special design as surface material for SBS Bitumen
Waterproofing Membranes and
APP Bitumen Waterproofing Membranes, it will be melt when torch
construction.
Films made of HDPE are noted for their characteristic rustle and
milky colouring and
they are odourless.
By adding colour concentrates a lot of colour variants can be
achieved and by means
of additives films with the desired properties can be produced.
Unlike LDPE films, their
structure is duller, their strength is higher, they are hazier, and
they are not shrinkable.
The thermal endurance of HDPE films is from −50 °C up to +110 °C.
Under everyday
conditions of use HDPE films are resistant to most chemical
substances, they do not
cause corrosion of the products packed in them, and they can be
welded.
They have minimum permeability of water vapours and smells, and
they transmit oxygen,
fats, and aromatic substances in a very limited amount. Generally,
HDPE films are more
chemically resistant, which is given by their structure.
In the natural variant, HDPE films are suitable for direct contact
with foodstuffs, the colour
variants only if the pigment content is within the concentration
defined by the producer.
HDPE films are environmentally unobjectionable and recyclable, and
they can be disposed
of in landfill or by combustion in which no substances harmful to
the environment are released.
Phameter:
| NO. | Item | Unit | Factory parameter | Detection method |
| 1 | Appearance | / | | Q/TPXP1-2015 |
| 2 | Thickness | mm | 0.008-0.015 | GB/T 6672-2001 |
| 3 | Width | mm | 1060-1070 | GB/T 6673-2001 |
| 4 | Max.Fd | N/50mm | 15 | GB/T 328.9-2007 |
| 5 | Elongation at break | % | 200 | GB/T 328.9-2007 |
Tickness:
The Application for SBS bitumen waterproof membranes:
FAQ:
Q1: Are you trading company or manufacturer ? A1: We are manufacturer.
Q2: Do you provide samples ? is it free or extra ? A2: Yes, we could offer A4 sample for free charge but if you need
in roll, we can offer 100-200m/roll for free, but shipping cost
need you to paid.
Q3: How long is your delivery time? A3: Depends on your quantity. Generally it is 15-20 days for 20GP
container.
Q4: What's your payment? A4: By L/C, by T/T (30% deposit before production, 70% balance
before loading).
Q5: What's the usage of this film? A5: It is special for the surface material when you producing SBS
or APP bitumen waterproofing membranes.
Q6: What's the thickness you can do? A6: We can do as thin as 7 microns, but usually do 10 microns.
Q7: What's your production capacity? A7: We have total 10 sets of machines, the production is about 1000
tons per month.
|
Main Market:
Quantity Assurance:
